
Setting Up Machine
Always read your instruction manual. The following is only a quick set up guide, if you are familier with the operation of Espresso Machines.
1. Insert Tank and ensure tubes (on some models) are in place
2.
Insert Drip Tray3.
Attach frother attachment4.
Fill Water Tank5.
Connect Cable6.
Switch on MachinePriming of the Machine
1.
Put a cup or jug under the steam arm2.
Place cup under Brew head3.
Open Steam Arm using the steam knob4.
Press Coffee Button [on manual machines]– this will dispense water through the steam arm5.
Collect a cup of water6.
While water is running, close steam arm7.
Water should come through brew head [on manual machines]8.
Collect half a cup through brew head [on manual machines]Machine is ready for use.
·
Fill ground coffee (finely ground) in filter basket and fit to machine and brew coffee. [on manual machines]· Remove the brew handle (filter holder) and empty dregs [ on manual machines].
·
DO NOT leave coffee in brew handle when you are steaming milk· Switch the steam button on, for steaming milk.
·
Clean the wand immediately after steaming milk· Release remaining steam through steam wand purge water through steam arm by pressing the coffee button while the steam wand is still open. Then close steam knob and run water through brew head.
·
You are now ready for the next coffee.